Antaira Technologies
LNP-C501G-SFP-bt-24 Series
5-Port Industrial Compact Gigabit IEEE 802.3bt PoE++
Unmanaged Ethernet Switch, 4*10/100/1000TX (90W/Port),
1*100/1000 SFP Slot; 9~55VDC Power Input
Quick Installation Guide
Version 1.0
(May 2022)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
19020000000194
Package Checklist
The package contains the following items:
•
1 – Quick installation guide
•
1 – LNP-C501G-SFP-bt-24(-T)
•
1 – Wall mounting bracket set with screws
•
1 – DC cable –18 AWG & DC jack 5.5 x 2.1mm
•
1 – Dust cover set
Front Panel Layout
Product Overview
System Interface/Performance
•
All RJ45 ports support the auto MDI/MDI-X function
•
Embedded 4*10/100/1000Tx (90W/Port) RJ45 ports and
1*100/1000 SFP slots
•
Store-and-Forward switching architecture
•
8K MAC address table
•
Supports 10Kbytes jumbo frame
•
1Mbits memory buffer
Power Input & Connection
•
DC 9 to 55V redundant power, with a 6-pin removal terminal
block
•
It is recommended to use a UL listed industrial power supply
•
For bt PoE application(s), the recommended power input
should be not less than 53VDC
Operating Temperature
•
Standard operating temperature model: -10°C to 65°C
•
Extended operating temperature model: -40°C to 75°C
Case/Installation
•
IP40 protection
•
DIN-Rail and wall mount design
LED Indicators
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Red
Off
No event happened
On
Any of the listed trigger events occur
1. Power 1 or Power 2 is inactive
2. Total PoE loading is > 100% PoE Budget
3. PoE over current (per port)
4. Cable short (per port)
5. One of the channels in Dual PD fail
PoE Load
-
Off
PoE Load ≤50%
Blue
On
PoE Load 51~70%
Blue & Red
On
PoE Load 71~90%
Blue & Red
(Red flashing)
On
PoE Load 91~100%
SFP Port
Green
On
Connected to network, 100 or 1000Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 2~5
LNK/ACT
(Upper LED)
Green
On
Connected to network, 10/100/1000Mbps
Flashing
Networking is active, 10/100/1000Mbps
Off
Not connected to network
LAN Port 2~5
PoE Mode
(Lower LED)
Green
On
IEEE 802.3bt connection
(Single Signature PD Class 5~8/Dual
Signature PD Channel Class 1~5)
Off
No powered-device attached or power
supplying fails
Amber
On
IEEE 802.3af/at connection
(Single Signature PD Class 0~4)
Off
No powered-device attached or power
supplying fails
DIP Switch
The 4-pin DIP switch on the front panel of the Ethernet switch
works as the PoE controller for PoE port 2~5.
DIP Switch Number
ON (Default)
OFF
PoE DIP Switch 1
Enable Port 2 PoE Function
Disable Port 2 PoE Function
PoE DIP Switch 2
Enable Port 3 PoE Function
Disable Port 3 PoE Function
PoE DIP Switch 3
Enable Port 4 PoE Function
Disable Port 4 PoE Function
PoE DIP Switch 4
Enable Port 5 PoE Function
Disable Port 5 PoE Function
The 2-pin DIP switch is used to enable/disable PD Remote Reset
Technology (PRRT) and control SFP speed.
DIP Switch Number
ON
OFF (Default)
DIP Switch 1
Enable PRRT Function
Disable PRRT Function
DIP Switch 2
Control SFP speed at 100Mbps
Control SFP speed at 1Gbps
NOTE:
The device will reboot when the Dip switch of PRRT and
SFP setting is changed.
SFP# 1 – 100/1000
SFP# 1 – LED for Link/Activity Status
LAN# 2~5 LED for PoE Status
LAN# 2~5 – 10/100/1000Tx RJ45
LAN# 2~5 LED for Link/Activity
Status 10/100/1000Mbps
DIP Switch Setting for PRRT and
SFP Speed
Grounding Screw
LED for PoE Load Status – 90%, 70%
PoE DIP Switch
LED for Power 1, Power 2, Fault
6-Pin Removal Terminal Block (Power Input)
