ANTAIRA LNP-2804GN-SFP-T Скачать руководство пользователя страница 99

Страница: 99 / 147

Antaira Technologies - Industrial Ethernet Switches

LNP-2804GN-SFP-T User Manual V1.0

SNMP v1 and SNMP v2c use the group name (Community Name) certification. Its role is similar

to the password function. If SNMP v1 and SNMP v2c are used, you can go directly from the

configuration settings to this page to configure the SNMP community.

To access this page, click Management > SNMP > SNMP Community.

Figure 4.86 Management > SNMP > SNMP Community

The following table describes the items in the previous figure.

Item

Description

Community
Name

Enter a community name (up to 20 characters).

Access Right

Click the radio box to specify the access level (read only or read write).

Apply

Click Apply to save the values and update the screen.

The ensuing table for Community Status settings are informational only: No., Community

Name, Access Right, and Delete (click to delete the desired community name).

SNMP User Settings

The SNMP User Settings page allows you to create SNMP groups. The users have the same

level of security and access control permissions as defined by the group settings.

To access this page, click Management > SNMP > SNMP User Settings.

Содержание LNP-2804GN-SFP-T




















































































































































Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы:

ANTAIRA LNP-2804GN-SFP-T, Руководство пользователя, Страница: 99 / 147

Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы: