ANTAIRA LNP-2804GN-SFP-T Скачать руководство пользователя страница 73

Страница: 73 / 147

Antaira Technologies - Industrial Ethernet Switches

LNP-2804GN-SFP-T User Manual V1.0

The following table describes the items in the previous figure.

Item

Description

DMAC = SMAC

Click Enabled or Disabled to define DMAC-SMAC for the DoS Global
settings.

LAND

Click Enabled or Disabled to define LAND for the DoS Global settings.

UDP Blat

Click Enabled or Disabled to define UDP Blat for the DoS Global
settings.

TCP Blat

Click Enabled or Disabled to define TCP Blat for the DoS Global
settings.

POD

Click Enabled or Disabled to define POD for the DoS Global settings.

IPv6 Min
Fragment

Click Enabled or Disabled to define minimum fragment size for the
IPv6 protocol.
Enter the variable in bytes (0 to 65535) to set the minimum fragment
size when the function is enabled.

ICMP Fragments

Click Enabled or Disabled to define the ICMP Fragments function.

IPv4 Ping Max
Size

Click Enabled or Disabled to set the maximum ping size for the IPv4
protocol.

IPv6 Ping Max
Size

Click Enabled or Disabled to set a maximum ping size for the IPv6
protocol.

Ping Max Size
Setting

Enter the variable in bytes (0 to 65535) to set the maximum ping size.

Smurf Attack

Click Enabled or Disabled to set the Smurf Attack function.

TCP Min Hdr Size

Click Enabled or Disabled to set the minimum header size.
Enter the variable in bytes (0 to 31) to set the minimum header size.

TCP-SYN
(SPORT < 1024)

Click Enabled or Disabled to set the TCP synchronization function
(sport < 1021).

Null Scan Attack

Click Enabled or Disabled to set the Null Scan Attack function.

X-Mas Scan
Attack

Click Enabled or Disabled to set the X-Mas Scan function.

TCP SYN-FIN
Attack

Click Enabled or Disabled to set the TCP synchronization termination
attack function.

TCP SYN-RST
Attack

Click Enabled or Disabled to set the TCP synchronization reset attack
function.

TCP Fragment

(Offset Click Enabled or Disabled to set the TCP fragment
function (offset =1).

Apply

Click Apply to save the values and update the screen.

Содержание LNP-2804GN-SFP-T




















































































































































Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы:

ANTAIRA LNP-2804GN-SFP-T, Руководство пользователя, Страница: 73 / 147

Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы: