ANTAIRA LNP-2804GN-SFP-T Скачать руководство пользователя страница 49

Страница: 49 / 147

Antaira Technologies - Industrial Ethernet Switches

LNP-2804GN-SFP-T User Manual V1.0

Figure 4.31 L2 Switching > Multicast > IGMP Snooping > IGMP Settings

The following table describes the items in the previous figure.

Item

Description

IGMP Snooping
State

Select Enable or Disable to designate the IGMP Snooping State.

IGMP Snooping
Version

Select designated IGMP Snooping Version: V2 or V3.

IGMP Snooping
Report
Suppression

Select Enable or Disable to setup the report suppression for IGMP
Snooping.

Apply

Click Apply to save the values and update the screen.

The ensuing table for IGMP Snooping Information settings are informational only: IGMP

Snooping State, IGMP Snooping Version, and IGMP Snooping V2 Report Suppression.

The ensuing table for IGMP Snooping Table settings are informational only: Entry No., VLAN

ID, IGMP Snooping Operation State, Router Ports Auto Learn, Query Robustness, Query

Interval (sec.), Query Max Response Interval (sec.), Last Member Query count, Last Member

Query Interval (sec), Immediate Leave, and Edit (click to modify the settings).

IGMP Querier

IGMP Querier allows snooping to function by creating the tables for snooping. General queries

must be unconditionally forwarded by all switches involved in IGMP snooping.

To access this page, click L2 Switching > Multicast > IGMP Snooping > IGMP Querier.

Содержание LNP-2804GN-SFP-T




















































































































































Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы:

ANTAIRA LNP-2804GN-SFP-T, Руководство пользователя, Страница: 49 / 147

Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы: