ANTAIRA LNP-2804GN-SFP-T Скачать руководство пользователя страница 117

Страница: 117 / 147

Antaira Technologies - Industrial Ethernet Switches

LNP-2804GN-SFP-T User Manual V1.0

117

The following table describes the items in the previous figure.

Item

Description

Index

Enter the index entry (1 to 65535) to define a specific RMON event.

Description

Enter a value (1 to 2147483647) to define the interval value for the
Alarm Collection history.

Type

Click the drop-down menu to define the event type: None, Log, SNMP
Trap, Log, and Trap.

Community

Enter the community string to be passed for the specified event.

Owner

Enter the name of the owner of the RMON event.

Apply

Click Apply to save the values and update the screen.

The ensuing table for Event Information settings are informational only: Index, Description,

Type, Community, Owner, and Delete (click to delete the desired index).

4.56 Diagnostics

Through the Diagnostics function, configuration of settings for the switch diagnostics is available.

4.57 Cable Diagnostics

The Cable Diagnostics page allows you to select the port for applying a copper test. To

access this page, click Diagnostics > Cable Diagnostics.

Figure 4.104 Diagnostics > Cable Diagnostics

Item

Description

Port

Click the drop-down menu to select a pre-defined port for diagnostic
testing. Gigabit ports are displayed with a channel A to D designation.

Copper Test

Click Copper Test to display the test result for the selected port.

Содержание LNP-2804GN-SFP-T




















































































































































Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы:

ANTAIRA LNP-2804GN-SFP-T, Руководство пользователя, Страница: 117 / 147

Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы: