ANTAIRA LNP-2804GN-SFP-T Скачать руководство пользователя страница 111

Страница: 111 / 147

Antaira Technologies - Industrial Ethernet Switches

LNP-2804GN-SFP-T User Manual V1.0

111

Figure 4.96 Management > SMTP Client > Global Settings

The following table describes the items in the previous figure.

Item

Description

Active Profile

Click the drop-down menu to select the profile status (None, 1 or 2).

Apply

Click Apply to save the values and update the screen.

The ensuing table for SMTP Information settings are informational only: Active Profile Id.

Profile Settings

The Profile Settings page allows you to select the server IP, the server port, and sender mail for

the listed profile.

To access this page, click Management > SMTP Client > Profile Settings.

Figure 4.97 Management > SMTP Client > Profile Settings > Profile Settings

The following table describes the items in the previous figure.

Item

Description

Profile ID

Click the drop-down menu to select the identification type for the
profile (1 or 2).

Server IP

Enter the IP address to designate the server host.

Server Port

Enter the port number to designate the port associated with the server
IP address.

Содержание LNP-2804GN-SFP-T




















































































































































Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы:

ANTAIRA LNP-2804GN-SFP-T, Руководство пользователя, Страница: 111 / 147

Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы: