ANTAIRA LNP-2804GN-SFP-T Скачать руководство пользователя страница 103

Страница: 103 / 147

Antaira Technologies - Industrial Ethernet Switches

LNP-2804GN-SFP-T User Manual V1.0

103

Figure 4.90 Management > Power Over Ethernet > PoE Port Settings

The following table describes the items in the previous figure.

Item

Description

Port

Click the drop-down menu to select a PoE port.

Enabled

Select Enabled or Disabled to designate the PoE port function by
ports.

Power Limit From
Classification

Select Enabled or Disabled to designate the power limit classification.

Legacy Mode

Select Enabled or Disabled to designate the legacy mode option for
the port.

Priority

Click the drop-down menu to configure the power supply priority:
Critical, Low, Medium, or High. Default is Low.

Power Limit

Enter a number to set the port power current limitation to be given to the
Powered Device (PD)

Apply

Click Apply to save the values and update the screen.

The ensuing table for PoE Information settings are informational only: Port, Enable State,

Power Limit From Classification, Priority, Legacy and Power Limit (W).

Содержание LNP-2804GN-SFP-T




















































































































































Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы:

ANTAIRA LNP-2804GN-SFP-T, Руководство пользователя, Страница: 103 / 147

Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы: