ANTAIRA LNP-2804GN-SFP-T Скачать руководство пользователя страница 100

Страница: 100 / 147

Antaira Technologies - Industrial Ethernet Switches

LNP-2804GN-SFP-T User Manual V1.0

100

Figure 4.87 Management > SNMP > SNMP User Settings

The following table describes the items in the previous figure.

Item

Description

User Name

Enter a user name (up to 32 characters) to create an SNMP profile.

Access Right

Click read-only or read-write to define the access right for the profile.

Encrypted

Click the option to set the encrypted option for the user setting.

Auth-Protocol

Click the drop-down menu to select the authentication level: MD5 or SHA.
The field requires a user password.



MD5: specify HMAC-MD5-96 authentication level



SHA: specify HMAC-SHA authentication protocol

Password

Enter the characters to define the password associated with the
authentication protocol.

Priv-Protocol

Click the drop-down menu to select an authorization protocol: none or DES.
The field requires a user password.



None: no authorization protocol in use



DES: specify 56-bit encryption in use

Password

Enter the characters to define the password associated with the authorization
protocol.

Add

Click Add to save the values and update the screen.

The ensuing table for User Status settings are informational only: User Name, Access Right, Auth-

Protocol, Priv-Protocol and Delete (click to delete the desired user name).

Содержание LNP-2804GN-SFP-T




















































































































































Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы:

ANTAIRA LNP-2804GN-SFP-T, Руководство пользователя, Страница: 100 / 147

Результаты поиска

Содержание LNP-2804GN-SFP-T

Отзывы: