Antaira Technologies
LNP-0602 Series
6-Port Industrial PoE+ Unmanaged Ethernet Switch,
w/4*10/100Tx (30W/Port) + 2*100Fx
Quick Installation Guide
Version 1.0
(September 2017)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
19020000000021
Package Check List
The package contains the following items:
1 – Quick installation guide
1 – LNP-0602 Series
1 – Wall mounting bracket set with screws
1 – DC cable –18 AWG & DC jack 5.5 x 2.1mm
1 – RJ45 dust cover set
Front Panel Layout
Top Panel View
LNP-0602 series top panel is equipped with one 6-pin removal
terminal block connector for dual DC power inputs
(48~55VDC).
Product Overview
System Interface/Performance
All RJ45 ports support the auto MDI/MDI-X function
Ethernet connectivity 4*10/100Tx RJ45 ports
Store-and-forward switching architecture
2K MAC address table
Power line EFT protection: 2,000VDC; Ethernet ESD
Protection: 6,000VDC
Power Input & Connection
DC 48 to 55V redundant power, with a 6-pin removal
terminal block
It is recommended to use a UL listed industrial power supply
Operating Temperature
Standard operating temperature model: -10°C to 70°C
Extended operating temperature model: -40°C to 75°C
Case/Installation
IP30 protection
DIN-Rail and wall mount design
LED Indicators
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Red
On
Power input 1 or 2 is inactive
Off
Both power input 1 and 2 are active
LAN Port 1~4
(Upper LED)
Green
On
Connected to network, 100Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 1~4
(Lower LED)
Green
On
Connected to network, 10Mbps
Flashing
Networking is active
Off
Not connected to network
Fiber Port
Green
On
Connected to network, 100Mbps
Flashing
Networking is active
Off
Not connected to network
PoE Indicator
(Port 1~4)
Green
On
The port is supplying power to the powered-device
Off
No powered-device attached or power supplying
fails
Quick Installation
Ethernet Ports
RJ45 Ports (Auto MDI/MDIX)
All RJ45 ports are auto-sensing for 10Base-T or 100Base-TX
device connections. Please follow the wiring pin assignment
table below for Ethernet port installation.
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
LAN# 1~4 – 10/100Tx RJ45
LAN# 1~4 LED for Link/Activity Status
100Mbps
LAN# 1~4 LED for Link/Activity Status
10Mbps
LED for Power 1, Power 2 and Fault
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
Fiber Port #1~2
DIP Switch
LED for PoE
LED for Fiber Link/Activity Status
DIP Switch
