Antaira Technologies
LNP-0500G-bt Series
5-Port Industrial Gigabit IEEE 802.3bt Unmanaged Ethernet
Switch, w/4*10/100/1000Tx (90W/Port) + 1*10/100/1000Tx
Quick Installation Guide
Version 1.0
(May 2020)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
19020000000132
Package Check List
The package contains the following items:
1 – Quick installation guide
1 – LNP-0500G-bt(-T)
1 – Wall mounting bracket set with screws
1 – DC cable –18 AWG & DC jack 5.5 x 2.1mm
1 – RJ45 dust cover set
Front Panel Layout
Top Panel View
LNP-0500G-bt series top panel is equipped with one 6-pin
removal terminal block connector for dual DC power inputs
(48~55VDC).
Product Overview
System Interface/Performance
All RJ45 ports support the auto MDI/MDI-X function
Embedded 4*10/100/1000Tx RJ45 ports (90W/Port) and
1*10/100/1000Tx RJ45 port
Store-and-forward switching architecture
8K MAC Address Table
Supports 10Kbytes jumbo frame
1Mbit memory buffer
Power Input & Connection
DC 48 to 55V redundant power, with a 6-pin removal
terminal block
Max. current: 3.9A
Max. PoE output: 180W
It is recommended to use a UL listed industrial power supply
Operating Temperature
Standard Operating Temperature model: -10°C to 65°C
Extended Operating Temperature model: -40°C to 75°C
Case/Installation
IP30 Protection
DIN-Rail and Wall Mount Design
PoE DIP Switch
DIP Switch Number
ON
OFF
PoE DIP Switch 1
Enable Port 1 PoE Function
Disable Port 1 PoE Function
PoE DIP Switch 2
Enable Port 2 PoE Function
Disable Port 2 PoE Function
PoE DIP Switch 3
Enable Port 3 PoE Function
Disable Port 3 PoE Function
PoE DIP Switch 4
Enable Port 4 PoE Function
Disable Port 4 PoE Function
LED Indicators
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Red
On
Any of the listed trigger events occur, (will trigger relay)
1. Power 1 or Power 2 is inactive
2. Total PoE loading is > 100% PoE Budget
3. PoE over current (per port)
4. Cable short (per port)
5. One of the channels in Dual PD fail
Off
No trigger events occur
PoE Load
Off
Off
The actual PoE Consumption of all connected working PDs
budget was
≤
50%
Blue
On
The actual PoE Consumption of all connected working PDs
budget was 51 ~ 70%
Red
On
The actual PoE Consumption of all connected working PDs
budget was 71 ~ 90%
Blinking
(1 time/s)
The actual PoE Consumption of all connected working PDs
budget was 91 ~ 100%
LAN Port 1~4
(Upper LED)
Green
On
Connected to network, 10/100/1000Mbps
Blinking
Networking is active
Off
Not connected to network
LAN Port 1~4
(Lower LED)
Green
On
IEEE 802.3bt connection
(Single Signature PD Class 5~8 / Dual Signature PD
Channel Class 1~5)
Off
No powered-device attached or power supplying fails
Amber
On
IEEE 802.3af/at connection
(Single Signature PD Class 0~4)
Off
No powered-device attached or power supplying fails
LAN Port 5
Green
On
Connected to network, 1000Mbps
Blinking
Networking is active
Off
Not connected to network
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
LAN# 1~5 – 10/100/1000Tx RJ45
LAN# 5 – LED for Link/Activity Status
1000Mbps
LAN# 1~4 – LED for Link/Activity Status
10/100/1000Mbps
LED for Power 1, Power 2, Fault
and PoE Load
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
LAN# 1~4 – LED for PoE Status
DIP Switch
LAN# 5 – LED for Link/Activity Status
10/100Mbps