Antaira Technologies - Industrial Ethernet Switches
LMX-2828G-10G-SFP Hardware Manual V1.0
10
4. Hardware Installation
4.1
Installation Steps
This section will explain how to install Antaira
Technologies’ LMX-2828G-10G-SFP:
Installation Steps
1. Unpack the industrial Ethernet switch from the original packing box.
2. Check if the rack-mount bracket is screwed on the industrial Ethernet switch.
•
If the rack-mount bracket is not screwed on the industrial Ethernet switch, please
refer to the
Rack Mounting
section for rack-mount bracket installation.
3. Power on the industrial Ethernet switch and then the power LED light will turn on.
•
If you need help on how to wire power, please refer to the
Connecting the Power
Input
section.
•
Please refer to the
LED Indicators
section for LED light indication.
4. Prepare the twisted-pair, straight-through category 5 cable for Ethernet connection.
5. Insert one side of the RJ45 cable into the
switch’s Ethernet port and on the other side into
the networking device’s Ethernet port, e.g. switch PC or server. The Ethernet port’s (RJ45)
LED on the industrial Ethernet switch will turn on when the cable is connected to the
networking device.
•
Please refer to the
LED Indicators
section for LED light indication.
6. When all connections are set and the LED lights all show normal, the installation is complete.
