Antaira Technologies
LMX-0602-XX-V2 Series
6-Port Industrial Managed Ethernet Switch,
w/4*10/100Tx + 2*100Fx SC or ST Fiber Connectors
- Version 2 Hardware
Quick Installation Guide
Version 1.1
(December 2019)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
19020000000084
Package Check List
The package contains the following items:
⚫
1
– Quick installation guide
⚫
1
– LMX-0602-XX-V2 Series
⚫
1
– Wall mounting bracket set with screws
⚫
1
– DC cable –18 AWG & DC jack 5.5 x 2.1mm
⚫
1
– RJ45 dust cover set
⚫
1
– RJ45 to DB9 Serial Console cable
Front Panel Layout
Top Panel View
LMX-0602-XX-V2 series top panel is equipped with one 6-pin
removal terminal block connector for dual DC power inputs
(12~48VDC).
Product Overview
System Interface/Performance
All RJ45 ports support the auto MDI/MDI-X function
Embedded 4*10/100Tx Fast Ethernet RJ45 Ports and
2*100Fx SC or ST type Fiber connectors; Multi-mode 2Km
or Single-mode 30Km
Store-and-forward switching architecture
8K MAC address table
Power line EFT protection: 2,000VDC; Ethernet ESD
Protection: 6,000VDC
Power Input & Connection
DC 12 to 48V redundant power, with a 6-pin removal
terminal block
It is recommended to use a UL listed industrial power supply
Operating Temperature
Standard operating temperature model: -10°C to 70°C
Extended operating temperature model: -40°C to 75°C
Case/Installation
IP30 protection
DIN-Rail and wall mount design
LED Indicators
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Red
On
Power input 1 or 2 is inactive
Off
Both power input 1 and 2 are active
Master
Green
On
ERPS Owner Mode (Ring Master) is ready
Off
ERPS Owner Mode is not active
Ring
Green
On
Ring Network is active
Off
Ring Network is not active
LAN Port 1~4
(Left LED)
Green
On
Connected to network, 100Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 1~4
(Right LED)
Green
On
Connected to network, 10Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 5~6
LNK/ACT
Green
On
Connected to network, 100Mbps
Flashing
Networking is active
Off
Not connected to network
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
LAN# 1~4 LED for Link/Activity Status
10Mbps
LAN# 1~4 LED for Link/Activity Status
100Mbps
Reset Button
LED for Power 1, Power 2, Fault,
Master, and Ring
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
Console Port
USB for Configuration Back-up
LAN# 1~4
– 10/100Tx RJ45
Fiber Port# 5~6 LED for Link/Activity Status
100Mbps
Fiber Port# 5~6
– 100Fx
