ANTAIRA LMP-1802G-M12-10G-SFP-67-110 Series Скачать руководство пользователя страница 6

Страница: 6 / 26

Antaira Technologies - Industrial Ethernet Switches

LMP-1802G-M12-10G-SFP-67-110 Series - Hardware Manual - v1.0

1 Overview

Antaira Technologies’ LMP-1802G-M12-10G-SFP-67-110 Series is a 18-port managed gigabit Ethernet switch, which

provides 16*10/100/1000 Base-T(X) with IEEE 802.3 af/at PoE compliant and 2*1G/10G ﬁber slots.

LMP-1802G-M12-10G-SFP-67-110 Series is a fully manageable light layer 3 Ethernet switch series and supports power

inputs redundancy. LMP-1802G-M12-10G-SFP-67-110 Series offers standardized network redundancy ITU-T G.8032 ERPS

v2 (Ethernet Ring Protection Switch) protocol, providing <50ms recovery time to the network.

LMP-1802G-M12-10G-SFP-67-110 Series provides comprehensive network security and management capability by

supporting Multi-user account, IGMP, GVRP, VLAN, QoS, SNMP, RADIUS, , Aggregation (Static, LACP), SSH, SSL,

IP source guard to create a highly-secured network environment. For power saving purposes, assuring PD priority and

enhancing security level of the network, LMP-1802G-M12-10G-SFP-67-110 Series also supports PoE scheduling and PoE

output limit function to set up PoE output duration and watt at will.

LMP-1802G-M12-10G-SFP-67-110 Series is an M12 IP67 PoE+ industrial gigabit Ethernet switch that meets the

high-reliability requirements demanded by industrial applications. Its M12 connectors ensure a tight and robust

connection and it guarantees reliable operation on applications that are subject to high vibration and shock in dust, liquid

or gas laden environments. Being able to operate under the standard temperature range from -10°C to 65°C or the

extended temperature range from -40°C to 70°C, the LMP-1802G-M12-10G-SFP-67-110 Series can be installed in almost

any harsh environment.

1.1 Product Hardware Features

System Interface and Performance

All M12 ports support Auto MDI/MDI-X Function

M12 connector with IP67 rated protection

Store-and-forward switching architecture

Power Input

DC 24~110V redundant

The power input speciﬁcation complies with the requirements of SELV (Safety Extra Low Voltage) and the power

supply should comply with UL 61010-1 & UL 61010-2-201

Operating Temperature

LMP-1802G-M12-10G-SFP-67-110: -10°C to 65°C

LMP-1802G-M12-10G-SFP-67-110-T: -40°C to 70°C

Case / Installation

IP67 protection metal housing

Содержание LMP-1802G-M12-10G-SFP-67-110 Series



























Результаты поиска

Содержание LMP-1802G-M12-10G-SFP-67-110 Series

Отзывы:

Похожие инструкции для LMP-1802G-M12-10G-SFP-67-110 Series

Бренды по названию

Популярные бренды

ANTAIRA LMP-1802G-M12-10G-SFP-67-110 Series, Руководство по оборудованию

Результаты поиска

Содержание LMP-1802G-M12-10G-SFP-67-110 Series

Отзывы:

Похожие инструкции для LMP-1802G-M12-10G-SFP-67-110 Series

Бренды по названию

Популярные бренды