ANTAIRA LMP-1600G-M12-67-110 Series, Руководство по оборудованию, Страница: 11 / 25

Antaira Technologies - Industrial Ethernet Switches
LMP-1600G-M12-67-110 Series - Hardware Manual - v1.0
2.3 LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that display the power status and
network status. Each LED indicator has a different color and has its specific meaning, see below in Table 2.1 .
LED Color Description
P1 Green
On Power Input 1 is active
Off Power Input 1 is inactive
P2 Green
On Power Input 2 is active
Off Power Input 2 is inactive
Status
Green On The system is ready and works fine. No events are occurring.
Red
Flashing Firmware upgrading
On System booting or configured event happens
Master Green
On ERPS Owner Mode (Ring Master) is ready
Off ERPS Owner Mode is not active
Ring Green
On Ring Network is active
Flashing ERPS Ring works abnormally or misconfigured
Off Ring Network is not active
PoE Load
Off Off PoE Load ≤ 50%
Blue On PoE Load 51 - 70%
Red On PoE Load 71 - 90%
Red Flashing PoE Load 91 - 100%
Note: The Max. PoE output of this switch is 120 Watts.
LAN Port 1~16
Green
On Connected to the network, 1000Mbps
Flashing Networking is active
Off Not connected to the network
Amber
On Connected to the network, 10/100Mbps
Flashing Networking is active
Off Not connected to the network