ANTAIRA LMP-1002G-SFP Series Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 21

ANTAIRA LMP-1002G-SFP Series Скачать руководство пользователя страница 17

Antaira Technologies - Industrial Ethernet Switches

LMP-1002G-SFP Series Hardware Manual V1.2

13

3.7 Wall Mounting

Follow the steps below to mount the industrial Ethernet switch using the wall mounting bracket as

shown below in Figure 3.4.

Caution: “Wall” means industrial control panel wall

1. Remove the DIN-Rail bracket from the industrial Ethernet switch by loosening the screws.

2. Place the wall mounting brackets on the top and bottom of the industrial Ethernet switch.

3. Use the screws to screw the wall mounting bracket on the industrial Ethernet switch.

Caution: The torque for tightening the screws on the device is 3.5 in-lbs.

4. Use the hook holes at the corners of the wall mounting bracket to hang the industrial Ethernet

switch on the wall.

5. To remove the wall mount bracket, do the opposite from the steps above.

Figure 3.4

Remove DIN-Rail Bracket from the Switch

Below, in Figure 3.5 are the dimensions of the wall mounting bracket.

Figure 3.5

«
...
15
16
17
18
19
...
»

Содержание LMP-1002G-SFP Series






















Отзывы:

Нет отзывов