ANTAIRA LMP-0601G-SFP Series, Руководство пользователя

Страница: 13 / 85

Antaira Industrial Ethernet Switches
LMP-0601G-SFP Series User Manual V1.1
6
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that
display the power status and network status. Each LED indicator has a different color and has
its own specific meaning, see below in Table 2.1.
LED Color Description
P1 Green
On Powerinput1is active
Off Powerinput1isinactive
P2 Green
On Powerinput2is active
Off Powerinput2isinactive
Fault
Green
On System is ready
Off
System is booting
Red
On Fault Alarm
Off
System is in normal state
Owner
Green
On ERPS Owner Mode (Ring Master) is ready
Off
ERPS Owner Mode is not active
Ring
Green
On Ring Network is active
Off
Ring Network is not active
LAN Port 1~ 4
(Left LED)
Green
On Connected to network
Flashing Networking is active
Off Not connected to network
LAN Port 1~ 4
(Right LED)
PoE Indicators
Green
On The port is supplying power to the powered-device
Off
No powered-device attached or power supplying fails
LAN Port 5
(Left LED)
Green
On Connected to network, 1000Mbps
Flashing Networking is active
Off Not connected to network
LAN Port 5
(Right LED)
Green
On Connected to network, 10/100Mbps
Flashing Networking is active
Off Not connected to network
Fiber Port 6
LNK/ACT
Green
On Connected to network
Flashing Networking is active
Off Not connected to network
Table 2.1
LED Indicators for LMP-0601G-SFP Series