6-38
Programming an LCD Annunciator Card,
Continued
Step 2. Programming
LEDs,
continued
4.
Click on the Ref Address field and associate a point with the mode you set in Step 3. The
list that appears depends on the Mode selection. The Ref Address list contains either
physical points, pseudo points, list points, or no entries.
Programming Events
The Event Reporting panel of the LCD Annunciator card programming screen allows you to
select which events are reported at the annunciator.
Click on the check boxes that correspond to the events that should be routed to the annunciator.
The list is as follows:
•
Silence / Reset Events
•
SMPL Print Statements
•
Walk Test Events
•
Fire Alarm Events
•
Trouble Events
•
Supervisory Events
