background image

1.  Introduction

Thank you for purchasing the the only portable PA systems featuring the Evo True Wireless 
transmitter.  This Patent Pending PLL synthesized wireless microphone system operates in an FCC 
approved UHF band frequency with 16 selectable channels. Please read this instruction manual 
carefully before operating your system.  This manual covers the function and operation of the wireless 
microphone system and portable PA system.

2.  Safety

While the Evo transmitter is water resistant, the Group.X portable electronics are not.  Please 
observe all safety precautions.

Do not spill liquid on the Group.X and do not drop either unit.

Do not place the units near heat sources such as radiators, amplifiers, or etc. 

Do not expose it to direct sunlight, extremely dusty conditions, excessive moisture, or vibration.

 

3.  Environment

Do not throw used electronics into a fire or garbage bin with domestic rubbish.  Be sure to dispose 
of used batteries in accordance with local waste disposal rules.

You want to say you are green?    Both the Evo Headworn Transmitter and the Group.X portables 
feature recharging battery systems.  Even better, you don't have to keep buying batteries!

4.  Wireless Notes

Before setting up, make sure that the transmitter and receiver are tuned to the same frequency.

Do not use two transmitters tuned to the same frequency.  

Always operate your system with a fully charged battery.

While checking sound, move the transmitter around the area where you use the system to look for 
dead spots (loss of signal).  If you find any dead spots, change the receiver position.  If it does not 
work, avoid such places.

To help avoid interference, do not put the receiver too near substantial metal or reflective objects 
and avoid obstructions between transmitter and receiver.

Avoid the interference from TV, radio, other wireless appliances and etc..

Wireless systems depend on fully charged batteries.  Low batteries will seriously degrade 
performance.  Be certain to allow charge time prior to use.

Be certain that the Group.X portable PA is exposed and in 'line of sight' with the transmitter.

2

Содержание Group.X Evo





















Отзывы: