Anslut 004743, Руководство по эксплуатации

Страница: 20 / 21

EN
20
3. Put the plugs in the drilled holes and fasten the mount with
two screws.
4. Put the lamp on the mount and screw on with the two
screws.
USE
NOTE:
Before the solar cell lamp can shine at full capacity the solar
panel must have charged the battery in direct sunlight for 48
hours.
1. Twist the solar panel to release it from the chimney.
2. Pull off the plastic tab between the battery and the contact
plate.
3. Replace the solar panel on the chimney.
4. Place the solar lamp so that it is exposed to the sun for at
least 48 hours to charge the battery.
Positioning
• The position, weather conditions and season affect the
length of time that the batteries can power the lamp. If the
solar panel has been in sunlight for 8 hours, the solar lamp
will shine for up to 6 hours.
• The batteries will not be fully charged if the solar lamp is
placed in the shade, which will result in a shorter lighting-up
period and reduce the lifespan of the batteries.