Ansell ALPHATEC FLASH Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 48

Ansell ALPHATEC FLASH Скачать руководство пользователя страница 6

6

2. Description of suit

AlphaTec

®

FLASH is

• A totally encapsulating/Level A, gastight chemical protective suit
• Intended for use with a self-contained breathing apparatus (SCBA) and a full-face mask*
• Single-skin, i.e. no overcover is needed
• Re-usable

The suit is fitted with:
• Booties/sewn-in socks
• Replaceable gloves
• Visor which is available in two optional sizes; CV (standard) or VP1 (larger)
• Suit ventilation upon request

The following accessories are delivered with every suit:
• Cotton comfort inner gloves
• Silicone coated oversocks
• Maintenance kit for zipper and Bayonet ring system
• Extra safety locking pins for the Bayonet ring system
• Suit hanger
• Black plastic bag
• AlphaTec

®

Bag

• Instructions for use

* The suit will accommodate the major brands of SCBAs, such as Interspiro, Survivair, Scott,

ISI, Dräger and MSA.

The suit has to be worn with overboots which are certified to NFPA 1991:2016 and

a protective safety helmet meeting the requirements for type 1, class G helmets of

ANSI Z89.1.

For more information about materials, components & accessories, see chapter 11.

«
...
4
5
6
7
8
...
»

Содержание ALPHATEC FLASH

















































Отзывы:

Нет отзывов