Anrtisu Cell Master MT8212B, Руководство пользователя, Страница: 265 / 294

Interface Cable Installation
Communication between the instrument and the PC is accomplished over a null modem se-
rial cable provided with the instrument (Anritsu part number 800-441, and optional USB to
serial adapter, part number 551-1691, if required).
Step1. Install the null modem serial interface cable to the RS232 Serial Interface con-
nector on the test connector panel.
Step2. Connect the other end of the serial interface cable to the appropriate COM port
connector on the PC.
Step3. Turn on both the instrument and the PC.
Using Handheld Software Tools
Select Start , Programs and select Software Tools .
Downloading Traces
Traces that can be downloaded from the instrument are grouped by the date on which they
were saved. They are further organized in chronological order for each date, with the oldest
trace at the top of the list. Each trace listing displays the trace name and measurement type
for that trace. Available measurement types are:
SA (Spectrum Analyzer) Insertion Loss Power Monitor
TG (Tracking Generator) Insertion Gain Spectrogram
TGF (TG Fast Tune) Power Meter RSSI
Return Loss CDMA Channel Scanner
SWR GSM
Cable Loss T1
DTF (Distance to Fault) E1
Transmission
Measurement
EVDO
NOTE: Not all selections apply to every Anritsu Handheld instrument.
Chapter 19 Handheld Software Tools
19-3
HOLD
RUN
START
CAL
AUTO
SCALE
SAVE
SETUP
RECALL
SETUP
LIMIT
MARKER
SAVE
DISPLAY
RECALL
DISPLAY
PRINT
MODE FREQ/DIST AMPLITUDE MEAS/DISP
SYS
ENTER
CLEAR
ESCAPE
ON
OFF
/
1 2
4
5 6
7 8
9 0
3
+
-
.
S332D
COM PORT
SERIAL INTERFACE
Figure 19-2. Serial Cable Connection