Anritsu S331E Скачать руководство пользователя страница 75

Страница: 75 / 126

System Operations

5-6 Updating the Site Master Firmware

Site Master User Guide

PN: 10580-00252 Rev. K

5-11

5-6

Updating the Site Master Firmware

The Site Master is updated using a USB memory stick. Updated product information can be
found on the Anritsu website:

http://www.anritsu.com/en-US/test-measurement/rf-microwave/cable-and-antenna-analyzers

Search for the product model number and click the link. On the product page, press the
Downloads link, then click the Drivers/Firmware/Software tab.

Click on the “Firmware Update for the Site Master S3xxE” link.

Click the “Download” button, then “Run”. After the download is complete, press “Run”
again and follow the on-screen instructions. Press “Help (?)” for additional information.

After the firmware update is saved on a USB memory stick, eject the memory stick from

the computer.

Turn the Site Master off and insert the memory stick into the instrument.

Connect the AC adapter and turn on the Site Master.

The instrument should update automatically. Follow the instrument prompts.

If the automatic update did not start, complete the following steps:

On the instrument, press the

Shift

key, then the

System

(8) key.

Press the following key sequence:

System Options

Reset

Update Firmware

The Load Firmware menu opens.

Press the

Load Firmware

main menu key (located at the bottom left corner of the

instrument screen).

Press the

Update Application Firmware

submenu key.

From the choices presented, select the desired “Save” mode.

Press the

Enter

key to begin the firmware update.

Press the

Enter

key one more time to confirm that you want to upgrade the

instrument firmware.

After the update is complete, the instrument will restart.

Note

The “Firmware Revision History” link provides a summary of the firmware changes.

Note

Do not turn off the instrument during the firmware update to avoid potential
permanent damage.

Содержание S331E































































































































Результаты поиска

Содержание S331E

Отзывы:

Похожие инструкции для S331E

Бренды по названию

Популярные бренды

Anritsu S331E, Руководство пользователя

Результаты поиска

Содержание S331E

Отзывы:

Похожие инструкции для S331E

Бренды по названию

Популярные бренды