Anritsu Network Master MT9090A Series, Руководство по эксплуатации, Страница: 53 / 200

MT9090A/MU909011A Network Master User’s Guide 2-13
3. Hold the Release down and insert the selected plug
adapter, making sure that the tab on the plug
adapter is seated in the slot on the top of the AC
charger/adapter transformer.
4. Release the pull down Release, making sure that the
tab on the Release is seated in the slot on the base of
the plug adapter.
AC Power Operation
Use the following procedure to operate the unit on AC power.
To use the AC Charger/Adapter:
1. Open the cover over the DC input port, located on
the top connector panel of the unit (see Figure 2-5
on page 2-11) and then attach the jack from the AC
charger/adapter to the port.
2. Plug the AC charger/adapter’s transformer into an
AC outlet.
Note
Make sure that the AC charger/adapter’s
transformer is equipped with the correct plug type.
3. Press the Menu/Power key to start the unit.