Anritsu Network Master MT9090A Series, Руководство по эксплуатации, Страница: 100 / 200

4-2 MT9090A/MU909011A Network Master User’s Guide
3. When the self-test is complete, the unit launches the
Fault Locate application. The next screen displayed
depends on the Power Meter Step and Connection
Check Step settings made on the Preferences Setup
screen (see Figure 4-4 on page 4-5).
Note
The Power Meter Step selection is only active on
units with the factory installed Power Meter option.
•
When the optional Power Meter is enabled, the
Power Meter Step screen appears at the
conclusion of the self-test.
Figure 4-1: Power Meter Step Screen
•
When the Connection Check Step is enabled
and the Power Meter Step is disabled (or the
unit is not equipped with a Power Meter), the
screen shown in Figure 4-2 on page 4-3
appears at the conclusion of the self-test.