Chapter 4 Operations for Each Function
4-20
4.3.5 Displaying Gaussian trace
A Gaussian distribution trace can be displayed in the graph when the
Gaussian Trace check box is checked. This is useful when comparing the
Peak Power / Average Power distribution of the waveform pattern used
with the Gaussian distribution.
Figure 4.3.5-1 Gaussian Trace Check Box
4.3.6 Interaction with signal generation application (Quick Add Mode)
The method for adding a trace to the CCDF graph in conjunction with a
signal generation application can be set and changed. This function is
enabled only when the CCDF graph display function is activated. Click
the Quick Add Mode button to display the Quick Add Mode dialog box.
Figure 4.3.6-1 Quick Add Mode Dialog Box
■
When Add is selected:
A trace is added to the CCDF graph when CCDF is selected from the
Simulation menu or the CCDF tool button is clicked after data
generation by the signal generation application. Note that the FFT graph
display will not be updated when the eight traces are all used.