Chapter 2 Installation/Uninstallation
2-8.
2.2.3 Uninstallation procedure
Uninstall the IQproducer
TM
for
MG3700A/MG3710A/MG3710E/MG3740A from your PC’s hard disk with
the following procedure.
Uninstallation Procedure:
1. Click the
Start
button on the Windows task bar, point
Setting
, and
click
Control Panel
.
2. Double-click the
Add or Remove Programs
icon.
3. On the
Change or Remove Programs
tab, click the
IQproducer
item
in the
Currently Installed Programs
list to display it highlighted.
4. Click the
Change/Remove
button.
5. When the uninstall program starts, read the message, and click the
OK
button.
6. A confirmation message may be displayed during uninstallation,
asking whether to remove a shared file. Select
NO
unless it is not
certain whether the indicated file is shared by any other programs.
Some programs may not function correctly if a necessary shared file
is removed inadvertently.
7. When “Uninstallation Complete” is displayed, click the
Finish
button.
Note:
If a shared file is removed, there is a possibility that other
application programs may not function. Do not remove the shared
file unless it is not certain whether the indicated file is shared or
not.
Even if a shared file is removed inadvertently, it may be restored
by installing the IQproducer
TM
for
MG3700A/MG3710A/MG3710E/MG3740A again.
If the short file name support was disabled on your Windows,
IQproducer
TM
for MG3700A/MG3710A/MG3710E/MG3740A before
version 1.02 cannot be uninstalled.
