Anritsu MA24106A, Быстрый старт, Страница: 8 / 12

6 PN: 10585-00021 Rev. L USB Power Sensors QSG
6. Making an MA24xxxA Power Measurement PowerXpert™
6. Making an MA24xxxA Power Measurement
This section describes how to perform a basic power measurement using
PowerXpert with the following: MA24106A, MA24108A, MA24118A,
MA24126A, MA24208A, MA24218A, MA24330A, MA24340A, and
MA24350A.
For making a power measurement with the MA24105A using
PowerXpert, see
“Making an MA24105A Power Measurement” on
page 1-4 .
For making a power measurement with the MA245xxA using
PowerXpert, see
“Making an MA245xxA Power Measurement” on
page 1-8 .
1. Open PowerXpert.
2. Connect the MA24xxxA to a computer as shown in Figure 3
on page 7 . PowerXpert detects the model type and provides the
associated screen interface.
3. Click the
Zero
sensor button to Zero the power sensor before
making power measurements.
4. Connect the RF source to the
RF IN
port of the MA24xxxA.
Caution
Prevent connector damage and ensure quality
measurements when connecting RF components. Refer to
the PowerXpert User Guide for applying connector
maintenance and care.
Note
When removing or inserting an MA24xxxA at the PC’s USB
port, wait a few seconds for PowerXpert to detect the
change and update the PowerXpert user interface.