3
6.
Raise the cross brace assembly until the mounting holes in the cross brace are aligned with the holes in the legs. Attach the cross
braces to the table legs using two 3/8” x 5” carriage bolts inserted through each leg and cross brace along with a 3/8” flat washer
and 3/8” hex nut on the end of each of the carriage bolts.
Use the hammer to set the carriage bolt and expose the threads before adding the washers and nut.
Insert two #9 x 2 1/2” Torx screws through the tabletop frame and into each leg.
7.
Build the seat support units using two #9 x 3” Torx screws to attach the seat leg on each end for the full seat base and two #9 x 3” Torx
screws to attach the seat leg to one end of the half seat bases.
