annke DN41R Скачать руководство пользователя страница 23

Страница: 23 / 106

Digital Video Recorder User Manual

Chapter 3 Live View

3.1 Introduction of Live View

Live view shows you the video image getting from each camera in real time. The DVR will automatically enter

Live View mode when powered on. It is also at the very top of the menu hierarchy, thus hitting the ESC many

times (depending on which menu you’re on) will bring you to the Live View mode.

Live View Icons

In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the

record and alarm in the channel, so that you can know whether the channel is recorded, or whether there are alarms

occur as soon as possible.

Table 3. 1

Description of Live View Icons

Icons

Description

Alarm (video loss, tampering, motion detection or sensor alarm)

Record (manual record, schedule record, motion detection or alarm triggered record)
Alarm & Record

Event/Exception (motion detection, sensor alarm or exception information. For details,

see

Chapter 8.6 Handling Exceptions.

)

3.2 Operations in Live View Mode

In live view mode, there are many functions provided. The functions are listed below.

•

Single Screen:

show only one screen on the monitor.

•

Multi-screen:

show multiple screens on the monitor simultaneously.

•

Auto-switch:

the screen is auto switched to the next one. And you must set the dwell time for each screen on

the configuration menu before enabling the auto-switch. Menu>Configuration>Live View>Dwell Time.

•

Start Recording:

normal record and motion detection record are supported.

•

Quick Set:

select the output mode to Standard, Bright, Gentle or Vivid.

•

Playback:

play back the recorded videos for current day.

•

Aux/Main output switch:

the DVR checks the connection of the output interfaces to define the main and

auxiliary output interfaces. When the aux output is enabled, the main output cannot do any operation, and

you can do some basic operation on the live view mode for the Aux output.

The priority level for the main and aux output is HDMI/VGA>CVBS. See the table below.

Table 3. 2

Priorities of Interfaces

S.N

VGA/HDMI

CVBS

Main output

Auxiliary output

√

VGA/HDMI

CVBS

√

VGA/HDMI

√

CVBS

√

means the interface is in use,

means the interface is out of use or the connection is invalid. And the HDMI,

VGA and CVBS can be used at the same time.

Содержание DN41R











































































































Результаты поиска

Содержание DN41R

Отзывы:

Похожие инструкции для DN41R

Бренды по названию

Популярные бренды

annke DN41R, Руководство пользователя

Результаты поиска

Содержание DN41R

Отзывы:

Похожие инструкции для DN41R

Бренды по названию

Популярные бренды