anko JJB-301, Руководство пользователя

Страница: 17 / 20

Page 17 of 20
•
Completely remove the safety screw cap. Caution must be taken as the
unit will still be very hot.
• Allow the appliance to cool it down for about 10 minutes.
•
Tip out the residual water in the tank and clean the external surface with
a piece of dry cloth.
Note
: Burns can occur from touching hot parts, hot water or steam. Be
cautious when you turn this appliance upside down to empty the water as
the water in the tank may still be hot.
•
Re-fit the safety screw cap as described in the Operation Procedure
section of this manual.
•
Store the appliance safely and in a dry place.
Do Not wind the power cord around the appliance body as this will damage
the cord over time. Simply loop the cable and place next to the appliance
13 Cleaning Your Steam Cleaner
• Turn off and unplug appliance prior to cleaning and let completely cool.
•
Do Not immerse the appliance in water, or any other liquid.
•
Rinse out the water chamber with clean fresh cold water.
• Do not allow detergents or solvents etc. to enter the boiler as this will
damage the appliance.
•
Wipe the outer surface of the appliance with a soft damp cloth and dry
with a dry towel.
•
Do not use abrasive creams, solvents, steel wool or scouring pads as they
will damage the finish.
•
All removable accessories should be detached and cleaned thoroughly in
warm, soapy water at regular intervals.
• Do Not place appliance or components in the dishwasher.
CAUTION: DO NOT IMMERSE MAIN BODY IN WATER OR LIQUID.