Page 14 of 20
9.4 Upholstery Cleaning
NOTE: Read the care labels for the upholstered surface before
proceeding to ensure steaming is permissible. We suggest to
perform a test clean in the surface in an inconspicuous area.
•
Assemble the same components as under section “Steaming Clothes”.
•
Place the Mop flat onto the fabric and squeeze the steam trigger whilst
moving the mop in a circular motion across the fabric to remove stains.
•
The
Brush Nozzle
or
Angled Nozzle
may be used for spot stain
removing.
10 Installation of Accessories
10.1 Extension Nozzle & Flexible Extension Nozzle
•
Hold the outer section of the
Extension Nozzle
, push it onto the
Cleaner
Nozzle
all the way up and then screw on the collar.
•
Installation of the
Flexible Extension Nozzle
and the
Mop Head
Accessory
is carried out with the same procedure.
•
To remove the
Extension Nozzle
, the
Flexible Extension Nozzle or the
Mop Head Accessory
, reverse the procedure above.
10.2 Brush Nozzle or Angled Nozzle
•
The
Angled Nozzle
and the
Brush Nozzle
must be connected to the end
of the
Extension Nozzle
for use.
Do Not
attach directly onto the Steam
outlet nozzle.
•
Fit the
Extension Nozzle
as described previously then fit either the
Angled Nozzle
or the
Brush Nozzle
over the tip of the
Extension
Nozzle
, and push all the way on until it is in position.
Содержание JJB-301
Страница 1: ...Hand Held Steam Cleaner User Manual Model No JJB 301 Rev 4 READ AND SAVE THESE INSTRUCTIONS...
Страница 2: ...Page 2 of 20...
Страница 20: ...Page 20 of 20...
