anko EV-6803-S259, Руководство пользователя, Страница: 26 / 28

Page 26 of 28
12 Troubleshooting
Will Not Switch On
Check that the battery is fully charged and inserted correctly.
The Motor or Battery has overheated.
Allow to cool for at least 1 hour.
The floor Head turned off
and red text CLEAN
BRUSH flashing
The floor Head brush is jammed.
Ensure the Vacuum Cleaner is switched off, the battery is
removed then remove the debris from the brush.
Red text CLEAN FILTER
flashing
Clean the filter and empty the Dust Canister.
Check for blockages and unblock.
Please call 1300 105 888 to order a new Filter or Battery.
Vacuum Cleaner turned off
and red text COOLING
flashing
The battery has overheated. Do not charge or use in
temperatures 40°C and above.
Unplug the battery charger (if charging) and allow the vacuum
cleaner to cool down for at least 1 hour before attempting to
start again
Noisy operation
Clean the main filter and empty the Dust Canister
Check for partial blockages and unblock.
Suction Not Strong
Clean the exhaust filter, main filter and empty the Dust Canister.
Check for blockages and unblock
Check that the battery is fully charged.
Please call 1300 105 888 to order a new Filter or Battery.
Speed setting may only be set to Low. Press the “Increase
Power” Button to select the Highest power mode.
Floor Head hard to push
The Rotary Brush in the floor head may be jammed with debris
etc.
Ensure the Vacuum Cleaner is switched off, the battery is
removed then remove the debris from the brush.
Or, the carpet pile may be too long.
Static Shock
In some rare instances, one or two users may feel an electric
discharge when touching or using the vacuum cleaner during
or after use. This is a well know phenomenon of Static
Electricity discharge that happens mostly when the user
vacuums a synthetic fibre carpet or other synthetic surfaces. It
can also be more prevalent in dry and cool environments.
Although the feeling of the Static Electricity can be unpleasant
for the user, it is not dangerous and is not a fault of the
vacuum cleaner. If this static discharge is a problem for the
user, the user could try wearing insulating footwear during
vacuuming (i.e., rubber or leather soles) or increase the
humidity / heat level in the surrounding environment or both.