anko EV-6803-S259, Руководство пользователя, Страница: 16 / 28

Page 16 of 28
8 Indicator Lights
8.1 Jammed Floor Head Brush
The vacuum cleaner is fitted with a sensor that detects if the floor head rotary
brush gets jammed.
If the brush gets jammed, the Floor Head will turn off and the words “ CLEAN
BRUSH ” in red text on the control panel will blink on and off.
Note : The vacuum suction motor will continue to run, therefore; switch off the
vacuum cleaner and refer to the “Cleaning the Motorised Floor Head” section
in this manual on how to clear a floor head jam.
8.2 Filter Blockage / Air Flow Blockage
The vacuum cleaner is fitted with a sensor that detects if the filter is severely
blocked or if there is an airflow blockage.
If the filter becomes severely blocked, or if there is an airflow blockage, the
words “ CLEAN FILTER ” in red text on the control panel will blink on and off.
Important
: If this happens, it is very important to turn the vacuum cleaner off
before it overheats.
Check for blockages in the floor head and tubes etc. If no blockages are found,
clean or replace the filter.
Refer to “Cleaning the Filter” section in this manual on how to clean or replace
the main filter.