ONE-STEP
HAIR DRYER
MODEL: AJ-PCA044
SAFETY INSTRUCTIONS
Electricity Safety
· Always unplug the appliance immediately after using.
· DO NOT operate this appliance with a voltage converter.
· DO NOT place or store appliance where it can fall or be pulled
into a tub or sink.
· DO NOT use near, place in, or drop into water or other liquid.
DO NOT use the appliance near filled bathtub, wash basin or
during shower. If the appliance falls into water, unplug it
immediately.
· This appliance should never be left unattended when plugged in.
Turn off the switch and unplug the electrical cord when not in use.
· DO NOT use the appliance with a twisted, bent or otherwise
damaged cord. DO NOT pull, twist or wrap the cord around the
appliance. DO NOT use an extension cord with this appliance.
· Never operate this appliance if it has a damaged cord or plug,
if it is not working properly, or if it has been damaged or dropped
into water. Return the appliance to the manufacturer for
examination and replacement, if applicable.
· IMPORTANT - This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to
rig this safety feature.
Related to Use
· Close supervision is necessary when this appliance is used by,
on or near children or individuals with certain disabilities.
· Use this appliance only for its intended use as described in this
manual. DO NOT use attachments not recommended by the
manufacturer.
· Keep the cord and appliance away from heated surfaces.
Attachments (when furnished) may be hot during use. Allow to
cool down before handling.
· Never use while sleeping.
· Never block or insert any object into the air openings of the
appliance or place it on a soft surface, such as a bed or couch,
where the air openings may be blocked. Keep the air openings
free of lint, hair, and the like.
· DO NOT direct hot air toward eyes or other heat-sensitive areas.
· DO NOT place appliance on any surface while it is operating,
keep your hair away from the air inlets.
· DO NOT use outdoors or operate where aerosol (spray) products
are being used or where oxygen is being administered.
· Household use only.
· This appliance is provided with a protective device that may
make the appliance inoperable under some abnormal
conditions (such as immersion of the appliance). If the
appliance becomes inoperable, return the appliance to a
service center for examination and repair. For appliances
provided with user- resettable protective devices, the
instructions shall:
a) Describe the purpose of the test and reset buttons,
b) Specify the frequency of the testing,
c) Describe the indication of proper functioning of the protective
device, and
d) Indicate that an appliance that does not operate in the proper
functioning condition is to be discarded or returned to a
service center for examination and repair.
SAVE THESE INSTRUCTIONS
Input
Rated Power
Operating Current
Rotate Speed
125V AC ~ 60Hz
1300W
10-11A
110,000 rpm
Tufted bristles
Tangle-free for smooth
and shine hair
Airflow Vents
Nylon-pin with
rounded tips
Quickly detangle
HIGH level
Hot air, fit for thick or coarse hair
LOW level
Hot air, fit for fine or thin hair
COOL level
Cold air, lock in the style
OFF
Turn off the dryer
Air Inlet Cover
USING THE HAIR DRYER
DO NOT use the appliance near filled bathtub, wash
basin or during shower. When used in a bathroom,
make sure to keep it away from liquid and unplug
from power immediately after use to avoid electric
shock or fire hazard.
CLEANING AND MAINTENANCE
Always unplug the appliance from power source and allow it to cool down before cleaning and maintenance.
Cleaning
Wipe the exterior with a damp cloth.
Unlock the air inlet cover at the bottom of the
appliance, remove dust and lint with a small
brush or vacuum cleaner brush attachment.
DO NOT rinse in water or allow moisture or
additional debris to enter the unit while cleaning.
Maintenance
This appliance is equipped with
a thermostat that may cycle OFF if it
is over-temperature due to the partially blocked
air inlet or air outlet openings.
If the appliance slows down during use,
turn it off and allow it to cool down, at which
time the thermostat will automatically reset.
When using this appliance near water
(e.g., bathrooms), the use of an electrical outlet
protected by a Ground Fault Circuit Interrupter
is recommended.
Storage
Allow appliance to cool down completely
and store out of reach of children in a safe,
dry location.
Handle cord carefully for longer life
and avoid wrapping, jerking, twisting or straining,
especially at plug connections.
TROUBLESHOOTING
Q: How to use for optimal effect?
A: It is recommended to use the hair dryer when your hair is 50% dry after washing.
Q: Hair is easily stuck.
A: The unique design of tufted bristles with boar technology can make the hair fluffy with better styling effect. It is recommended to comb your hair before using to reduce hair stuck.
Q: How to clean the hair dryer?
A: Please clean the hair on the dryer after each use, and clean the dust at the bottom of the dryer after using for a period of time.
WARRANTY & SERVICE
Thanks for choosing Anjou Salon One-Step Hair Dryer. This product is covered with Anjou product and labor warranty for 12 months from the date of its original purchase.
The warranty will not apply in cases of:
-Accident, misuse, or repairs performed by unauthorized personnel.
-Any unit that has been tampered with or used for commercial purpose.
-Use of force, damage caused by external influences.
-Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or non-compliance with the instructions.
-Partially or completely dismantled appliances.
-Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair
person not authorized by Anjou.
We can only provide after-sales service for products that are sold by Anjou or Anjou authorized retailers and distributors. If you have purchased your unit from a different place, please
contact your seller for return and warranty issues.
* Please have your invoice and order ID ready before contacting Customer Support.
1.
Plug into a socket and
press the TEST button.
The RESET button
should pop up and the
dryer stops. Press the
RESET button again
to resume.
·
Always test the safety plug before use. Periodically check the plug to verify its status.
·
If the TEST button works improperly, stop using and return the appliance to the manufacturer.
2.
Towel dry your hair to
remove excess water
to 50% dry, then comb
through the damp hair
to detangle for better
results.
3.
Select a level of COOL
-LOW-HIGH according
to your desire to turn
on the hair dryer.
Separate your hair into
manageable sections.
4.
For smooth blowouts,
place the dryer close
to the roots and
brush down toward
the ends.
5.
For voluminous blowouts,
place the dryer UNDER
the roots and roll outward
to the ends. For extra lift,
hold for 2-3s under
the roots.
6.
To curl ends IN/OUT,
place the dryer UNDER/
OVER the ends and hold
the dryer for 2-3s before
rotating INWARD/
OUTWARD.
7.
Repeat until hair has
been dried into luxurious,
voluminous styles.
Select the OFF position
to turn off the hair dryer.
Rev_1.2_EN
MANUFACTURER
Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd. Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
MADE IN CHINA
Professional Hair Dryer Brush
