000-015-480 Issue 5
22
nd
May 2017
Anite S-CORE Getting Started Guide
Page 46 of 47
Commercial In Confidence
A2
Changing TP-Link Router IP Address
To change the TP-Link router IP address:
1.
Load a browser and type in
10.23.201.100
into the address bar.
The browser prompts you to enter a username and password.
2.
Specify the default username and password:
Username:
root
Password:
root
3.
Once logged in, click on the
Network
tab, then the
DHCP and DNS
sub-tab from the menu.
4.
Scroll down and click on
Static Leases
.
5.
Modify each of the listed IP Addresses as required.
Here is a configuration example:
Example shown below (should be preconfigured
MAC Address
Reserved IP Address
Remark
F4-6D-04-42-B2-03
10.23.203.76
IP of S-CORE
00-04-A3-42-E7-EB
10.23.204.76
IP of Signalling Card
00-50-56-00-07-B8
10.23.205.76
IP of Application Server
Note:
The above details are listed in this manual as guidelines. The MAC Addresses and IP
Addresses vary according to the system being delivered.
