Anite NEMO FSR1, Руководство пользователя, Страница: 83 / 137

PC T EL 8 3
STARTING PCTEL SCANNERS
∇
Starting the GPS:
With the PCTEL LX WCDMA scanner you can use either the GSP receiver integrated into the
scanner or an external GPS. See page 86 for instructions on how to enable the integrated GPS
receiver.
♦
Note that you cannot use both the integrated and an external GPS receiver at the same
time.
♦
Note that with the PCTEL LX GSM/WCDMA scanner the Internal GPS receiver should be
activated only in UMTS mode.
♦
To be able to make Top-N preamble scanning the scanner receiver must acquire a GPS fix
at least 30 seconds before starting the Nemo Outdoor application in online mode. If the
existing configuration file includes a PCTEL WiMAX scanner, it is advised to open the
configuration file in offline mode. If scanner does not send any results after 30 seconds,
it is advised to send a reset command to the scanner via the user interface.
1. From the Measurement menu, select Add New Device .
2. Click on GPS .
3. From the list, select the GPS model that you have connected to the PC and click Next .
4. The GPS Properties dialog is opened. Set the parameters (see the GPS User Manual for
instructions). They should be correct by default. Click OK . The view will return to the Nemo
Outdoor main window.
5. In the Device Status window a green light should be blinking. This means that the GPS is
working properly.
∇
Starting the PCTEL MX/LX/EX/PCT GSM/WCDMA/1xEVDO/LTE Scanner:
1. Start Nemo Outdoor. Do not load any previous device configuration if asked.
2. From the Measurement menu, select Add New Device .
3. Click on Scanner .
4. From the list of scanners, select the appropriate handler according to the following table, and
click Next .
Scanner Handler
PCTEL LX GSM 1800 PCTEL LX GSM 1800
PCTEL LX GSM 1900 PCTEL LX GSM 1900
PCTEL LX GSM 850 PCTEL LX GSM 850
PCTEL LX GSM 850/1900 PCTEL LX GSM 850/1900
PCTEL LX GSM 900 PCTEL LX GSM 900
PCTEL LX GSM 900/1800 PCTEL LX GSM 900/1800
PCTEL LX UMTS 1700/2100 PCTEL LX UMTS 1700/2100