Anite NEMO FSR1, Руководство пользователя, Страница: 20 / 137

N e m o F S R 1 2 0
When the System information decoding option is selected, L3 messages are written in the log
file.
4. Click the Start Recording button to start recording the results in an output file.
TOP-N Pilot Scanning - UMTS
Unknown Pilot scanning can be used for scanning unknown pilots or the strongest pilots. The
Unknown Pilot Scan will from now on be referred to as TOP-N pilot mode/scanning.
∇
To set pilot scanning settings:
1. Open the Measurement Properties dialog by selecting Measurement | <device> | General
Properties .
2. In the Measurement Properties dialog, go to the Pilot scanning page.
CPICH Ec/No threshold defines the minimum level for the CPICH Ec/No. If the values are
below the threshold, the pilots are not reported.
Channel style refers to the style of the channel. For UMTS scanners, the options are Narrow
Band (200kHz) and Wide Band (3.84MHz).
Correlator parameter is no longer utilized by the FSR1 UMTS scanning algorithms. It is
encouraged to set this parameter to the highest correlation value, 4096.