Anita GARUDAN GF-1130-4412 MH, Руководство пользователя

Страница: 26 / 71

© ANITA
MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH 26
Connect the pedal and all connectors to the appropriate sockets as shown.
ATTENTION:
If you are unable to connect the connectors to the appropriate outlet, check the direction of
the pins. Make sure you are plugging into the correct outlet.
G4.2. Power supply and grounding
The grounding connection and checking of the correct connection parameters to the power
supply may only be carried out by an electrician. The system ground - the yellow/green wire
- must be securely connected to electrical outlet to
ensure safe operation and to prevent
machine malfunctions.
ATTENTION: All wires must be connected separately to avoid overloading and safe operation
of the machine!
G4.3. Connecting and settings
For more information, consult the installation manual for your particular engine model.
Power unit control box installation
Make sure you have enough space on the right side of the plate to install the control box.
The control box is mounted on the right side under the plate.
To install the foot controller (pedal), make sure it is placed right under the power unit and
attached to the underside of the plate. If necessary, loosen the screws, adjust the position
and angle, and retighten.
www.garudan.cz