Anglerfish Creative Lighting TRIGGER V2.0, Руководство пользователя

Страница: 8 / 18

p.4 Anglerfish Crea�ve Ligh�ng | Anglerfish Trigger V2.0
Electronic Sync Cable
Anglerfish Tri gger is also equipped with a Nikonos TM cable
bulkhead to trigger the remote strobe electronically. Only
use genuine Sea & Sea brand Nikonos cable
s or similar cable s
with a Nikonos 5 pin connector. Flooding the Nikonos
bulkhead will not damage the trigger since the connector is
sealed from the rest of the housing. Furthermore,
the
connectors are hard gold plated to provide excelle nt
corrosion free contact. However, to prolong the trigger ’s
service life, prior to each use, make sure the o-rings are free
of any sand or debris and that they are lubricated with the
manufacturer ’ s recommended silicon lubricant.
Turning On
The Anglerfish Trigger is equipped with an accelera�on
switch that is used to turn the unit on
or off. To wake up the
trigger from sleep mode simply hold the trigger in one ha nd
and strike your wrist against you r oth er hand . The impact will