Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China
Tallulah Fountain
AD95110
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item,
DO NOT
return the unit to place of purchase
. Please visit our web site
www.angelodecor.com
for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Pass the power cord of
the pump down the
cord pipe.
Pass the length of the
light cable from the orb
down the cord pipe.
Install the cord pipe
cover over the cord
pipe.
Locate the tubing and
attach it to the pump.
Note: water flow can
be adjusted using the
dial on the front of the
pump.
Lift, align and lower the
orb on to the base as
shown above.
Carefully retrieve the
light cable and pump
power cord from the
base. Align the cords
with the groove.
Securely attach the
light cable to the
transformer.
