Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China
Kensington Fountain
AD93413
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item,
DO NOT
return the unit to place of purchase
. Please visit our web site
www.angelodecor.com
for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Attach the included tubing
to the top part.
Pass the tubing into the
body of the fountain and
lower the top part in place
as shown.
Locate the tubing from
inside the fountain and
connect it to the pump.
Place the pump inside the
fountain.
IMPORTANT:
to prevent water loss, create
a drip-loop with the light cords by dipping
them into the reservoir before they exit out
the back of the fountain.
Align the cords then install the pump
access door.
Attach the cord from the
light connection to the
transformer.
Ensure the foam insert
that holds the light at the
bottom is positioned as
shown.
Retrieve the light
connection from inside the
fountain. This should not
be submerged.
