Geyser Peak™ Fountain
AD97787
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site
www.angelodecor.com
for assistance and warranty information.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China
Carefully unpack and
arrange all parts.
Locate the light cords from
inside the fountain. Securely
attach them to the transformer.
DO NOT SUBMERGE THE
TRANSFORMER OR
CONNECTION.
Locate the tubing from inside
the fountain and connect it to
the pump. Flow can be
adjusted using the dial on the
front of the pump.
Align the cords and slide the
pump access door in to
place.
Note
: The lights are pre-
installed.Be sure the rubber
bushing is securely in place
and light is firmly mounted on
the light spike.
Place the pump inside the
fountain. Create a 'drip loop' in
to the fountain with the light
cords to prevent any possible
water loss.
