Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China
Canmore Fountain
AD97834
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item,
DO NOT
return the unit to place of purchase
. Please visit our web site
www.angelodecor.com
for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Pass the tubing from the top
part through the opening as
shown above.
Lower the top part on to the
body of the fountain.
Retrieve the tubing and light
connection from the fountain.
IMPORTANT:
to prevent
water loss, create a drip-loop
with the light cables by
dipping them into the
reservoir before they exit out
the back of the fountain.
D
R
IP
-LOO
P
Attach the tubing to the
pump. Water flow can be
adjusted using the control on
the front of the pump.
Place the pump inside the
fountain. Align the cords
with the groove then slide
the pump access door in
place.
As an optional step, the
included foam inserts can be
placed at each lip opening to
regulate water flow.
Securely attach the cord
from the connector to the
transformer using the
threaded connector.
