Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item,
DO NOT return the unit to place of purchase
. Please visit our web site
www.angelodecor.com
for
assistance and warranty information.
AD97705
Bear Waterfall Fountain
Carefully unpack and arrange all
parts.
Retrieve the tubing and light
connection from the fountain.
The light connection must sit
outside the fountain.
IMPORTANT:
to prevent water loss
during operation, create a drip-loop
with the light cables by dipping them
into the reservoir before they exit out
the back of the fountain.
Attach the tubing to the pump.
Water flow can be adjusted using
the control on the front of the pump.
Place the pump inside the fountain.
Securely attach the cable from the
light connection to the transformer.
D
R
IP
-LOO
P
