Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China
Veneto Fountain
AD93707
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item,
DO NOT return the unit to place of purchase
. Please visit our web site
www.angelodecor.com
for
assistance and warranty information.
Pass the cord down the
pedestal and align it with
the groove at the base.
Carefully rest the large
bowl on its side. Pass the
cord from the pump down
the cord pipe.
Carefully unpack and
arrange all parts.
Set the riser in to place,
align the grooves then
lower and lock it to the
bowl.
Install the cord pipe cover
over the cord pipe as
shown.
Connect the tubing to the pump then place the pump
inside the riser. Install the pump access door.
Connect the tubing to the
top then pass it down the
centre of the small bowl.
Lower the top in place.
Align, lower and lock the
small bowl to the riser.
The included shims can
be used to level the
fountain if needed.
If splash is a concern, the
optional splash reduction
line (shown left) can be
draped through each spill-
point to reduce splash as
needed.
Carefully align, lower and
lock the bowl to the
pedestal.
