Installation Guide
Angel Armor Ballistic Door Panel (Level IIIA) for Chevy® Tahoe PPV
970 235 2961 [email protected] angelarmor.com
8
Detaching the Interior Door Panel and
Replacing the Window Regulator Bolt
CONTINUED
3
Remove the 10 mm bolt behind the door
handle.
4
Remove the trim cover in the arm rest
(see Figure 6 on page 7).
5
Remove the two 10 mm bolts in the arm rest.
6
Visually locate the interior door trim retainers
inside the vehicle door trim panel.
7
Pry open the interior door trim retainers
on the bottom corners of the vehicle door
trim panel at the retainer locations shown in
Figure 7.
8
Pry open the remaining interior door trim
retainers.
Figure 8. Prying open the vehicle interior door panel
Figure 7. Approximate locations of the interior door trim
retainers*
*For informational purposes, the door interior is shown here with the
interior door trim panel removed completely.