Installation Guide
Angel Armor Ballistic Door Panel (Level IIIA) for Chevy® Tahoe PPV
970 235 2961 [email protected] angelarmor.com
6
INSTALLATION
This section provides
instructions for installing Angel
Armor Avail Ballistic Door Panels
(Level IIIA) into the Chevy Tahoe
PPV (2007 to 2014 models).
Overview
Installation of the Angel Armor Ballistic Door
Panel (Level IIIA) into a Chevy Tahoe PPV is
accomplished quickly and easily with minimal
door disassembly. See
Procedure
on page 7
for detailed instructions.
General Installation Procedure
1
Detach interior door trim panel.
2
Replace factory window regulator bolt
with shorter supplied replacement bolt.
3
Insert and secure Angel Armor Ballistic
Door Panel.
4
Re-assemble vehicle interior door panel.
Important Notes
The directions, photographs and
illustrations in this guide depict an
installation performed on the driver’s
side. The same installation procedure
applies to the passenger door. NOTE: The
anti-abrasion panels face the interior of
the vehicle for both the driver-side and
passenger-side ballistic panels.
Note the location of screws, fasteners,
wires and door components before
disassembling to aid proper re-assembly
after panel installation.
Place all removed hardware and
components in a safe place during
installation.
Angel Armor Ballistic Door Panels are
semi-rigid, which allows them to be bent
slightly for easy installation. To prevent
damage to the ballistic panels, do not
bend the panel tighter than a 6” radius
(12” diameter).
Firm pressure may be needed to clear
minor obstructions during insertion
of the ballistic panels, but never use
excessive force. Excessive force may
damage internal door components
or puncture the ballistic door panel’s
weatherproof/protective cover.
Bypass obstructions inside the door,
such as crash bars or window attachment
brackets, by angling the panel during
insertion or by removing and re-inserting
the ballistic panel, as described in
Inserting the Ballistic Door Panel
on page 10.
