Installation Guide
Angel Armor Ballistic Door Panel (Level IIIA) for Chevy® Tahoe PPV
970 235 2961 [email protected] angelarmor.com
13
Re-attaching the Interior Door Panel
1
Replace the moisture barrier by pressing
its adhesive into the attachment points on
the door.
2
Align the top edge of the vehicle door trim
panel and hook it on the top edge of the door
interior, threading the lock rod through the
appropriate hole in the interior door trim panel.
3
Push down on the door trim panel to seat it
in position.
4
Align the interior door trim retainers with the
appropriate holes in the vehicle door.
5
Push firmly on each retainer area until the
retainers re-engage.
6
Replace the one 10 mm bolt behind the door
handle, and then replace the door handle
trim cover.
7
Replace the two 10 mm bolts in the arm rest,
and then replace the arm rest trim cover.
8
Replace the door lock by completing the
following procedure:
a
Verify that the vehicle door is unlocked.
b
Place the door lock knob on the lock rod.
c
Push down on the door lock knob so
that the bottom edge of the lock
knob retaining panel aligns with the
surrounding door trim.
d
Press on the lock knob’s retaining panel
to re-engage it with the lock rod threads.
e
Verify proper replacement by pushing
down on the lock. The top of the
lock knob should be level with the
surrounding door trim.
9
Re-connect the vehicle battery.
10
Attach the Angel Armor brand label to
the interior door panel by completing the
following procedure:
a
Clean the attachment location on
the door with isopropyl alcohol.
b
Allow the door surface to dry
completely.
c
Remove the backing from the
brand label.
d
Apply the brand label to the door,
pressing for at least 30 seconds to
ensure proper adhesion.
Figure 17. Closed retaining panel on lock knob
INSTALLATION COMPLETE:
Your vehicle is now
equipped with advanced
ballistic protection from
Angel Armor.
Figure 18. Attaching Angel Armor brand label
