Anest Iwata W 200, Инструкция по эксплуатации и обслуживанию

Страница: 3 / 40

3
W-200
HIGH T.E.C. Series_ PRESSURE | SUCTION
EN
IMPORTANT
This manual is an integral part of pressure spray gun and must to be read carefully before starting
ANY ACTIVITY involving the use, adjustment and maintenance of the equipment, including its handling.
This manual must be stored in a safe place for any future reference.
Be sure to observe warnings and cautions in this instruction manual.
If not, it can cause paint ejection and serious bodily injury by drawing organic solvent.
This
ANEST IWATA
pressure spray guns complies to ATEX regulations 2014/34/EU.
Protection level: II 2 G X Suitable for using Zones 1 and 2.
X marking: Any static electricity should be discharged from the spray gun and needs to be diverted to
the ground via a conductive air hose not included.
1. IMPORTANT INFORMATIONS
ANEST IWATA
spray guns, have been designed for the application of paints, lacquers and other products that can be atomized by means
of compressed air, on all surfaces suitable to receive this type of treatment.
2.1 TECHNICAL DATA
MODELS
NOZZLE
ORIFICE
mm (in)
AIR CAP SET
MARK
AIR PRESSURE
at Gun Inlet
bar (PSI)
FLUID
OUTPUT
ml/min
AIR
CONSUMPTION
l/min (cfm)
PATTERN
WIDTH
mm (in)
PRESSURE
W-200-084P
W-200
0.8 (0.031)
W-400 LV2 2.0 (29) 255 360 (12.7) 280 (11.0) W-200-104P 1.0 (0.039)
W-200-124P 1.2 (0.047)
W-200-082P 0.8 (0.031)
W-200 G2P 3.0 (43) 500 560 (19.8) 400 (15.7) W-200-102P 1.0 (0.039)
W-200-122P 1.2 (0.047)
W-200 WB-081P
W-200 WB
0.8 (0.031)
W-200 WB1 1.6 (23)
200
340 (12)
360 (14.2)
W-200 WB-101P 1.0 (0.039) 250
W-200 WB-121P 1.2 (0.047) 300 380 (15.0)
W-200-151ZP
W-200 ZP
1.5 (0.059)
W-200 R1Z 3.5 (50) 760 500 (17.7) 370 (14.6) W-200-201ZP 2.0 (0.079)
W-200-251ZP 2.5 (0.098)
W-200 S18
W-200
S18 | -S25
1.0 (0.039) W-200 G2P 3.0 (43) 500 560 (19.8) 360 (14.2)
W-200 S25
SUCTION
W-200-152S
W-200
1.5 (0.059)
W-200 K2
3.0 (43)
240
330 (11.7)
290 (11.4)
W-200-182S 1.8 (0.071) 290 340 (13.4)
W-200-202S 2.0 (0.079) W-200 R2 350 360 (12.7) 290 (11.4)
W-200-251S 2.5 (0.098) W-200 W1 760 500 (17.7) 370 (14.6)
W-200 WB-162S
W-200 WB
1.6 (0.063)
W-400 WB2 2.0 (29)
170
430 (15)
315 (12.4)
W-200 WB-182S 1.8 (0.071) 200 330 (13.0)
W-2003
W-2003
2.0 (0.079) W-200 R1
2.9 (42) --
270 (9.53)
300 ~ 400
W-2003 2.5 (0.098) W-200 W1 360 (12.7)
2. TECHNICAL SPECIFICATION
MODELS W-200 W-200 WB W-200 ZP W-200 S18 W-200 S25 W-2003
Max. working air pressure: 6.8 bar (98 PSI)
Weight g (lbs): 380 (0.84) 380 (0.84) 390 (0.86) 450 (0.99) 450 (0.99) 390 (0.86)
Noise level (LAeqT)*: 81.2 dB(A) 76.8 dB(A) 79 dB(A) 81.2 dB(A) 81.2 dB(A) 73.7 dB(A)
Air Connection G1/4”
Fluid Connection G3/8" G3/8" G3/8" G1/4”M - NPSM 1/4"F G1/4”M - G1/4”M M16x1
Max. Temperature range: Atmosphere 5 ~ 40 °C / Air-Fluid 5 ~ 43 °C
* Measuring point: 1m backwards from gun, 1.6 m height.
ALWAYS OBSERVE WARNINGS AND CAUTIONS IN THIS MANUAL
SYMBOL WARNING HAZARD LEVEL CONSEQUENCE
WARNING
POTENTIALLY
HAZARDOUS
SITUATION
DEATH OR SERIOUS INJURY
CAUTION MINOR TO MODERATE INJURY
IMPORTANT PROPERTY DAMAGE