Anest Iwata MSU-111N, Инструкция по эксплуатации

Страница: 28 / 40

- 26 -
Ű 9. Disassembly and Assembly
9. Place the ball and the pin onto the valve adaptor
set.
10. Place the packing (lower) onto the suction tube
and tighten the valve adaptor set.
11. Place the packing (upper) to the suction body and
tighten the suction tube to the suction body.
IMPORTANT
1. After disassembly and assembly for cleaning, maintenance or service, run the pump to be sure that the
pump operates collect according to 4-3. Checking operation procedure on page 11.
12. Tighten the wet cup.
13. Clean any grease or lube oil on the V-packings
according to 5-1. Flushing procedure on page 12.
14. Re-tighten the wet cup if cleaning fluid leaks
through the wet cup during the flushing procedure.
15. Loose the wet cup if the rod does not move
smoothly during pump operation.
HINT
1. Position plunger pump at the end of the down stroke to increase pump life when not in use.